Microchip

Tag: Microchip

Robotics – The PICAXE X2 Series

by on Aug.19, 2011, under Electronics, Microcontrollers, Picaxe

The PICAXE X2 Family of Microcontrollers

The PICAXE X2 Family

The PICAXE ‘X2’ series of microcontrollers, by Revolution Education Ltd., are Rev.Ed.’s advanced series of microcontrollers. The ‘X2’ series of microcontrollers are feature rich, and much much more powerful than Revolution Education Ltd.‘s previous microcontrollers. The ‘X2’ series consists of the 20X2, 28X2, 28X2 lv*, 40X2, and the 40X2 lv*.

The PICAXE ‘X2’ series of microcontrollers have many great new features. Features like almost every pin being configurable as an input or an output. Also the new PICAXE ‘X2’ series of microcontrollers have up to 3 pins that can be individually configured as hardware interrupt pins. The PICAXE ‘X2’ series of microprocessors have many more ADC channels available, support for touch sensing, and they also have an addition of two internal comparators that constantly compare two analogue values.

The PICAXE ‘X2’ series have much higher clock rates than before. Their default frequency is now 8 MHz as opposed to 4 MHz previously. This increase in frequency has greatly improving the processing speed of the PICAXE chips. The frequency also can be as high as 64 MHz!! The PICAXE ‘X2”s also have a much larger RAM, and up to 4 programming slots available on chip. In addition to the four internal programming slots, up to 4 other slots can be used by connecting an external i2c EEPROM chip – per i2c EEPROM connected! Since up to 8 different I2C chips could be used on the same I2C bus, we have a ‘theoretical’ 32 additional program slots available!

The new PICAXE ‘X2’ microcontrollers also have many more great features such as the ability to communicate with Microchip UNI/O EEPROM memory chips, the servo command now operates at 8 or 32 MHz, there is a new new doze low-power command, internal pull-ups, and many more great features. You can download the PICAXE ‘X2’ product briefing as a PDF from the link below.

(*lv = Low Voltage, 1.8v-3v Version)

Feature PICAXE Command 20X2 28X2 28X2 5v 28X2 3v 40X2 40X2 5v 40X2 3v
PIC18F series 14k22 25k22 2520 25k20 45k22 4520 45k20
(V) Range 1.8-5.5 2.1-5.5 4.5-5.5 1.8-3.6 2.1-5.5 4.5-5.5 1.8-3.6
Firmware Version C.0+ B.3+ B.0-B.2 B.A-B.C B.3+ B.0-B.2 B.A-B.C
Max In/Ex Freq(MHz) setfreq 64/na 16/64 8/40* 16/64 16/64 8/40* 16/64
Variables RAM peek, poke @bptr 128 256 256 256 256 256 256
Scratchpad RAM put, get @ptr 128 1024 1024 1024 1024 1024 1024

(* 32MHz [8MHz resonator with x4 PLL] is recommended for programs using serial commands as 40MHz is not an even multiple of 8 and so does not produce valid serial baud rates.)

See these other articles in the ‘Robotics:’ series…

Please leave your comments and sugestions for future articles in the series below. Thank you. :)





Just ‘a buck’ 😉
38 Comments :, , , , , , , , , , more...

Robotics – PICAXE M2/X1 Parts

by on Aug.15, 2011, under Electronics, Microcontrollers, Picaxe

Review article: ‘Robotics: Intro to PICAXE’

PICAXE Microcontrollers

PICAXE Microcontrollers

In my article entitled ‘Robotics: Intro to PICAXE’ I started out with a generalized description of the various PICAXE microcontrollers available from Revolution Education Ltd.. Here I would like to expand slightly and take a bit more In-depth look at the PICAXE microcontrollers. First starting with the ‘Standard Use’ class, then moving on to the ‘Advanced Use’ class after that. Revolution Education Ltd. has changed their previous categories from ‘Education, Standard, Advanced Use’ and combined ‘Education and Standard Use’ into one category. The M2 and X1 microchips are classified as the ‘Standard Use’ class, while the X2 series of microchips are classified as the ‘Advanced Use’ class of microcontrollers.

As of the writhing of this article, you still can purchase several of the older PICAXE microcontrollers, namely: the ‘PICAXE-08M Module’, ‘PICAXE-08 microcontroller’, ‘PICAXE-08 microcontroller (5 pack)’, ‘PICAXE-08 microcontroller (50 pack) [Only available to educational account holders.]’, ‘PICAXE-18X microcontroller’, ‘PICAXE-18X microcontroller (10 pack)’, ‘PICAXE-18M microcontroller (25 pack)’, and the ‘PICAXE-20M microcontroller (22 pack) [Only available to educational account holders.]’. I would suggest however that you stick to the the new PICAXE microcontrollers as they are richer in features, power, and cost LESS in many cases than the older discontinued PICAXE microcontrollers. (I am unsure how long the X1 parts will be available and would suggest moving up to either an X2 part or an M2 part instead)

In the table below you will see the stats for the standard class of PICAXE microcontrollers:

PICAXE Type IC Size Memory I/O Pins Outputs Inputs ADC Memory(Data) Polled Interrupt
08M2 8 pin 2048 6* 6* 6* 3 256(Shared) YES
14M2 14 pin 2048 11* 11* 11* 7 256 YES
18M2 18 pin 2048 16* 16* 16* 10 256(Shared) YES
20M2 20 pin 2048 16* 16* 16* 11 256 YES
28X1 28 pin 1000-3200 23 9-17 0-12 0-4 128+i2c YES
40X1 40 pin 1000-3200 32 9-17 8-20 3-7 128+i2c YES

(NOTE: the top speed of the M2 Series is 32MHz and the X1 series is 20MHz)
(NOTE: * Input/Output Pins are configurable as either)





Just ‘a buck’ 😉
41 Comments :, , , , , , , , , , , , , , , , more...

Robotics – Microcontroller ? Microprocessor ? or Microchip?

by on Aug.10, 2011, under Electronics, Microprocessors, Picaxe

Robotics - Microcontroller vs. Microprocessor vs. Microchip

Difference between Microcontroller , Microprocessor and Microchip

I know I promised to talk about the individual PICAXE microcontrollers from Revolution Education Ltd., and to go into detail on the features of each of their products, and I will… However, it was brought to my attention that there is some confusion about the differences between these three terms; microcontroller , microprocessor , and microchip ,… what they each mean,… and if they are interchangeable terms. This was Something I was confused about when I first started down this exciting road of robotics and electronics. It is easy to forget back then, (Not that I am an expert by any sense of the word) but we all have different levels of experience. The best advice I was given in the beginning was to just ask questions and not be afraid. There is always someone who knows more than you, just as there probably is someone who knows less than you. Most forums are great and the people more than willing to help out a newbie. 😉

So what is the difference between these three terms; microcontroller , microprocessor , and microchip?

Well, to be quick and to the point a microchip is a small piece of semiconductor material carrying many integrated circuits. Basically ANY ‘Chip’, or ‘IC’, is a Microchip. It is the broad category that describes and encompasses these devices. For example an Op-Amp, Memory chip, a microcontroller, a microprocessor, a timer such as the popular 555, and many more. They come in many different packages, such as SMD (surface mount device), MSOP (Micro Small Outline Package), SOIC (Small Outline IC Package), SIP (Single-In-Line Package), and many, many, MANY, more! The most popular package however is the DIP, or Dual-In-Line Package. This is the kind you see in the main picture of this article. It is breadboad friendly, sockets for the different pin sizes are cheap and readily available, and generally, at least in my own opinion, the easiest to use. I use DIP microchips almost exclusively. I always look for a microchip (or commonly called ‘chip’ or ‘IC’) in this package type first before settling on an other package type.

So if both microcontrollers and microprocessors can be called microchips, what is the difference between them? Well, basically, microprocessors are CPUs (Central Processing Units), and they can process data. That’s it. Whereas microcontrollers (sometimes abbreviated µC, uC or MCU) are much more in that they are a combination of a CPU, with memory (RAM, ROM, EPROM, or EEPROM), and programmable input/output peripherals, all in one neat single package or device. Basically an entire computer on a chip! Refer to my article ‘Robotics -Intro To Microcontrollers’ for more info. These Peripherals are devices that also have other functions that allow for interfacing between the microcontroller and other devices, such as; input/output pins, analog to digital converters, digital to analog converters, and more. In my blog posts and articles I’ll be focusing on microcontrollers, and just what all we can do with them. For more info on the PICAXE microcontroller refer to my article ‘Robotics – Intro To PICAXE’.





Just ‘a buck’ 😉
53 Comments :, , , , , more...

Samuel A. Clarke

↑ Grab this Headline Animator

Enter your email address:  by FeedBurner 

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Please review our Privacy Policy.

Visit my friends!

A few highly recommended friends...

Archives

All entries, chronologically...